direkt zum Inhalt springen

direkt zum Hauptnavigationsmenü

Sie sind hier

TU Berlin

Inhalt des Dokuments


Following the links below you find a continuously updated publication list of our group. In order to have an overview of our current publications please visit d|b|t|a's page on ResearchGate: Fachgebiet Dynamik und Betrieb technischer Anlagen


Hannes, L., Mark, H., Johannes, S., Marcus, G. and Jens-Uwe, R. (2018). An advanced approach to design structured packing columns using miniaturized experimental set-ups. Chemical Engineering Transactions. AIDIC: Italian Association of Chemical Engineering, 781-786.

D., M., S., H., O., K., H., A.-G. and G., W. (2012). Optimization of process operation strategies by combining process models with plant operating data. Chemical Engineering Transactions. AIDIC: Italian Association of Chemical Engineering, 1495-1500.

Wilhelm, R., Esche, E., Guetta, Z., Menzel, J., Thielert, H. and Repke, J.-U. (2018). Model Adaptation and Optimization for the Evaluation and Investigation of Novel Amine Blends in a Pilot-plant Scale CO2 Capture Process under Industrial Conditions. Chemical Engineering Transactions VOL. 69, 175–180.

Reepmeyer, F., Repke, J.-U. and Wozny, G. (2003). Analysis of the Start-up Process for Reactive Distillation. Chemical Engineering & Technology. Wiley, 81–86.

Repke, J.-U. and Wozny, G. (2002). Experimental Investigations of Three-Phase Distillation in a Packed Column. Chemical Engineering & Technology. Wiley, 513–519.

Aubel, T., Haseneder, R. and Repke, J.-U. (2011). Membrane-Based Conditioning of an Innovative Oil-Based Preservative for Food Technology. Chemical Engineering & Technology. Wiley, 1918–1923.

Repke, J.-U., Forner, F. and Klein, A. (2005). Separation of Homogeneous Azeotropic Mixtures by Pressure Swing Distillation – Analysis of the Operation Performance. Chemical Engineering & Technology. Wiley, 1151–1157.

Bock, H., Jimoh, M. and Wozny, G. (1997). Analysis of reactive distillation using the esterification of acetic acid as an example. Chemical Engineering & Technology. Wiley, 182–191.

Bonart, H., Jung, J., Kahle, C. and Repke, J.-U. (2019). Influence of Liquid Density and Surface Tension on the Pinning of Sliding Droplets on a Triangular Microstructure. Chemical Engineering & Technology. Wiley, 1381–1387.

Herdegen, V., Felix, A., Haseneder, R., Repke, J.-U., Leppchen-Fröhlich, K., Prade, I. and Meyer, M. (2014). Sterilization of Medical Products from Collagen by Means of Supercritical CO2. Chemical Engineering & Technology. Wiley, 1891–1895.

Schiffmann, P. and Repke, J.-U. (2015). Experimental Investigation and Simulation of Organophilic Pervaporation in Laboratory and Pilot Scale. Chemical Engineering & Technology. Wiley, 879–890.

Siegert, M., Stichlmair, J., Repke, J.-U. and Wozny, G. (2000). Heterogeneous Azeotropic Distillation in Packed Columns: Experimental Results. Chemical Engineering & Technology. Wiley, 1047–1050.

Holst, N., Javso, S., Godini, H. R., Glöser, S., Arellano-Garcia, H., Wozny, G. and Steinbach, J. (2012). Two-Dimensional Model for Oxidative Coupling of Methane in a Packed-Bed Membrane Reactor. Chemical Engineering & Technology. Wiley, 294–301.

Holz, S., Köster, P., Thielert, H., Guetta, Z. and Repke, J.-U. (2020). Investigation of the Degradation of Chelate Complexes in Liquid Redox Desulfurization Processes. Chemical Engineering & Technology. Wiley, 476–483.

Klapper, P., Repke, J.-U. and Raatz, S. (2011). Micellar Extraction of Zinc with Di(2-ethylhexyl)phosphoric Acid and the Addition of the Cationic Surfactant Cetyltrimethylammonium Bromide. Chemical Engineering & Technology. Wiley, 1529–1534.

Klapper, P., Repke, J.-U. and Raatz, S. (2011). Critical Evaluation of Different Mass Transfer Models Taking Zinc Extraction as an Example. Chemical Engineering & Technology. Wiley, 1966–1973.

Xu, Y. Y., Paschke, S., Repke, J.-U., Yuan, J. Q. and Wozny, G. (2009). Computational Approach to Characterize the Mass Transfer between the Counter-Current Gas-Liquid Flow. Chemical Engineering & Technology. Wiley, 1227–1235.

Xu, Y. Y., Paschke, S., Repke, J.-U., Yuan, J. Q. and Wozny, G. (2008). Portraying the Countercurrent Flow on Packings by Three-Dimensional Computational Fluid Dynamics Simulations. Chemical Engineering & Technology. Wiley, 1445–1452.

Li, P., Hoo, H. P. and Wozny, G. (1998). Efficient Simulation of Batch Distillation Processes by Using Orthogonal Collocation. Chemical Engineering & Technology. Wiley, 853–862.

Li, P., Wendt, M. and Wozny, G. (2004). Optimal Production Planning for Chemical Processes under Uncertain Market Conditions. Chemical Engineering & Technology. Wiley, 641–651.

Ortiz, A. P., Penteado, A., Thum, L., Karsten, T., Esche, E., Grigull, V., Schomäcker, R. and Repke, J.-U. (2020). Influence of process parameters on oxidative coupling of methane for ethylene production from biogas. Chemie Ingenieur Technik. Wiley, 1348–1348.

Paschke, S., Repke, J.-U. and Wozny, G. (2007). Analyse heterogener Filmströmungen mittels einer neuen $\upmu$PIV-Methode. Chemie Ingenieur Technik. Wiley, 1364–1364.

Paschke, S., Repke, J.-U. and Wozny, G. (2008). Untersuchungen von Filmströmungen mittels eines neuartigen Micro Particle Image Velocimetry Messverfahrens. Chemie Ingenieur Technik. Wiley, 1477–1485.

Paschke, S., Thiele, R. and Repke, J.-U. (2009). Untersuchung des Stoffübergangverhaltens dreiphasig betriebener Fallfilmabsorber. Chemie Ingenieur Technik. Wiley, 297–304.

Pogrzeba, T., Illner, M., Schmidt, M., Repke, J.-U. and Schomäcker, R. (2017). Microemulsion Systems as Switchable Reaction Media for the Catalytic Upgrading of Long-Chain Alkenes. Chemie Ingenieur Technik. Wiley, 459–463.

Zusatzinformationen / Extras


Schnellnavigation zur Seite über Nummerneingabe