direkt zum Inhalt springen

direkt zum Hauptnavigationsmenü

Sie sind hier

TU Berlin

Inhalt des Dokuments


Following the links below you find a continuously updated publication list of our group. In order to have an overview of our current publications please visit d|b|t|a's page on ResearchGate: Fachgebiet Dynamik und Betrieb technischer Anlagen


Beste, Y. A., Lisso, M., Wozny, G. and Arlt, W. (2000). Optimization of simulated moving bed plants with low efficient stationary phases: separation of fructose and glucose. Journal of Chromatography A. Elsevier BV, 169–188.

Bock, H., Jimoh, M. and Wozny, G. (1997). Analysis of reactive distillation using the esterification of acetic acid as an example. Chemical Engineering & Technology. Wiley, 182–191.

Bock, H., Wozny, G. and Gutsche, B. (1997). Design and control of a reaction distillation column including the recovery system. Chemical Engineering and Processing: Process Intensification. Elsevier BV, 101–109.

Bock, C., Esche, E., Müller, D. and Wozny, G. (2014). Superstructure Optimization. Technische Universität Berlin Proceedings of the 8th International Conference on Foundations of Computer-Aided Process Design. Elsevier, 267–272.

Bonart, H., Marek, A. and Repke, J.-U. (2017). Experimental characterization of stable liquid rivulets on inclined surfaces: Influence of surface tension, viscosity and inclination angle on the interfacial area. Chemical Engineering Research and Design. Elsevier BV, 226–232.

Bonart, H., Jung, J., Kahle, C. and Repke, J.-U. (2019). Influence of Liquid Density and Surface Tension on the Pinning of Sliding Droplets on a Triangular Microstructure. Chemical Engineering & Technology. Wiley, 1381–1387.

Bonart, H., Kahle, C. and Repke, J.-U. (2020). Optimal Control of Droplets on a Solid Surface Using Distributed Contact Angles. Langmuir. American Chemical Society (ACS), 8894–8903.

Bonart, H., Rajes, S., Jung, J. and Repke, J.-U. (2020). Stability of gravity-driven liquid films overflowing microstructures with sharp corners. Physical Review Fluids. American Physical Society (APS), 123–456.

Börner, J. H., Herdegen, V., Repke, J.-U. and Spitzer, K. (2012). The impact of CO2on the electrical properties of water bearing porous media - laboratory experiments with respect to carbon capture and storage. Geophysical Prospecting. Wiley, 446–460.

Börner, J.-H., Herdegen, V., Repke, J.-U. and Spitzer, K. (2015). The spectral complex electrical conductivity of the three-phase system sand/pore water/CO<sub>2</sub> at elevated pressures and temperatures. SEG Technical Program Expanded Abstracts 2015, 3129-3133.

Börner, J. H., Herdegen, V., Repke, J.-U. and Spitzer, K. (2016). Spectral induced polarization of the three-phase system CO2 textendash brine textendash sand under reservoir conditions. Geophysical Journal International. Oxford University Press (OUP), 289–305.

Bournazou, M. C., Hooshiar, K., Arellano-Garcia, H., Wozny, G. and Lyberatos, G. (2013). Model based optimization of the intermittent aeration profile for SBRs under partial nitrification. Water Research. Elsevier BV, 3399–3410.

Brehelin, M., Forner, F., Rouzineau, D., Repke, J.-U., Meyer, X., Meyer, M. and Wozny, G. (2007). Production of n-Propyl Acetate by Reactive Distillation. Chemical Engineering Research and Design. Elsevier BV, 109–117.

Brettschneider, O., Thiele, R., Faber, R., Thielert, H. and Wozny, G. (2004). Experimental investigation and simulation of the chemical absorption in a packed column for the system NH3textendashCO2textendashH2StextendashNaOHtextendashH2O. Separation and Purification Technology. Elsevier BV, 139–159.

Brinkmann, T., Naderipour, C., Pohlmann, J., Wind, J., Wolff, T., Esche, E., Müller, D., Wozny, G. and Hoting, B. (2015). Pilot scale investigations of the removal of carbon dioxide from hydrocarbon gas streams using poly (ethylene oxide)textendashpoly (butylene terephthalate) PolyActivetexttrademark) thin film composite membranes. Journal of Membrane Science. Elsevier BV, 237–247.

Brösigke, G., Repke, J.-U., Herter, A. and Rädle, M. (2014). Experimentelle und theoretische Analyse der dominierenden Wärmetransportmechanismen einer rollenden Kugel auf einer Platte. Chemie Ingenieur Technik. Wiley, 1628–1629.

Brösigke, G., Herter, A., Rädle, M. and Repke, J.-U. (2017). Fundamental investigation of heat transfer mechanisms between a rolling sphere and a plate in OpenFOAMtextregistered for laminar flow regime. International Journal of Thermal Sciences. Elsevier BV, 246–255.

Brösigke, G., Herter, A., Rädle, M. and Repke, J.-U. (2018). Direct Numerical Simulation of conjugated heat transfer between a spherical particle rolling over a planar surface. Applied Thermal Engineering. Elsevier BV, 456–463.

Bublitz, S., Esche, E., Tolksdorf, G., Mehrmann, V. and Repke, J.-U. (2017). Analysis and Decomposition for Improved Convergence of Nonlinear Process Models in Chemical Engineering. Chemie Ingenieur Technik. Wiley, 1503–1514.

Budiarto, T., Esche, E., Repke, J. and Leksono, E. (2017). Dynamic Model of Chloralkali Membrane Process. Procedia Engineering. Elsevier BV, 473–481.

Budiarto, T., Weigert, J., Hoffmann, C., Esche, E. and Repke, J. (2019). Evaluation of Discretization Methods for Modeling the Chloralkali Membrane Process. Computer Aided Chemical Engineering. Elsevier, 589–594.


C., D. C. L., Barz, T., Peñuela, M., Villegas, A., Ochoa, S. and Wozny, G. (2013). Model-based identifiable parameter determination applied to a simultaneous saccharification and fermentation process model for bio-ethanol production. Biotechnology Progress. Wiley, 1064–1082.

Canela-Sánchez, I., Delgado-Gonzaga, J., Huicochea, A., Esche, E., Repke, J.-U., Saravanan, R. and Juarez-Romero, D. (2018). Interaction analysis of a concentric component evaporator absorber for an absorption heat transformer. Applied Thermal Engineering. Elsevier BV, 415–421.

Chen, L., Repke, J.-U., Wozny, G. and Wang, S. (2009). Extension of the Mass Transfer Calculation for Three-Phase Distillation in a Packed Column: Nonequilibrium Model Based Parameter Estimation. Industrial & Engineering Chemistry Research, 7289-7300.

Zusatzinformationen / Extras


Schnellnavigation zur Seite über Nummerneingabe